BRIDGE CAP REPLACEMENT - IMAGE FOUR

The new bridge cap is glued in position with Titebond.
With reference to the scan, please note the following;

• The screw holes, for 'clamping' the new cap, are positioned clear of the new bridge wood
  which will be supporting the bridge pins.
• When the glue is set, the screws are removed and the holes plugged with 7/32" hard rock maple hammer shanks
  (secured with Titebond).

Next picture (image 5)

This page has opened in a new browser window. Should you wish to return to the original Overs Pianos browser page, please close this window in the top left 'close box'.